BioDry ProFlow – Water-Based Damp-Proofing Fluid - Ready to Use - 25L
Fields (ACP · UCP / Merchant Center)
Description (from PDP, plain text)
Professional-Grade DPC Injection Fluid for Rising Damp Treatment BioDry ProFlow RTU (Ready-to-Use) is a pre-mixed, water-based potassium methyl siliconate solution designed to create an effective chemical damp-proof course (DPC) without the need for on-site dilution. Suitable for low-pressure injection into mortar beds, it provides convenient and reliable rising damp protection for domestic, heritage, and light commercial projects. Key Features & Benefits Water-Based Formula: Non-flammable and easy to handle, ideal for sensitive indoor environments. Cost-Effective: High dilution rate (1:11.5) makes 2L concentrate yield up to 25L of ready-to-use solution. Effective Against Rising Damp: Forms a continuous barrier in the mortar bed to prevent moisture transfer. Low-Pressure Injection: Suitable for use in residential and heritage buildings with minimal disruption. Versatile Application: Effective in solid brickwork, stone, rubble-filled walls, and cavity walls. Freeze-Tolerant: Unaffected by freezing; suitable for storage and use in cold conditions. Application Areas Rising damp in brick and stone walls Remedial damp proofing in existing buildings Heritage and conservation properties Solid, cavity, and rubble-core walls Preparation & Application Surface Prep: Remove skirtings, plasters, and damaged renders. Rake out mortar beds to 10–15mm depth. Clean debris for adhesion. Drilling: Drill 10–14mm holes into or angled towards mortar beds. Spacing ≤170mm. Drill both sides for thicker or cavity walls. Injection: Dilute 1 part BioDry ProFlow with 11.5 parts clean water. Inject under 50 psi until mortar bed is fully saturated. Finishing: Plug holes and allow walls to dry before replastering. Use a bell-mouth render detail where external render was removed. Technical Specifications Composition: Potassium methyl siliconate Mix Ratio: 1 part concentrate to 11.5 parts water Coverage: ~2.5L per metre for 230mm thick wall Application Method: Low-pressure injection (5–50 psi) Appearance: Clear, colourless fluid Packaging: 2L jerrycan or 25L container Storage: 2 years unopened; diluted solution lasts 6 months Post-Treatment Recommendations Replaster using appropriate salt-resistant renders Do not decorate with vinyl paints or wallpapers for 9–12 months Maintain good ventilation to aid drying
Images & AI alt text (one alt per image)
Buy
Checkout happens on the official store. Final checkout remains a human-approved step.
Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.