GSX-R1000R Winglets

Fields (ACP · UCP / Merchant Center)

Description (from PDP, plain text)

HARMONIZE HMN Series Winglets — Suzuki GSX-R1000R (2017–2024) Model: HMN-L7GSXRK TS Suzuki just gave the GSX-R1000 its first real redesign since 2017, and for 2026 it finally gets factory winglets, adapted from the Team Suzuki CN Challenge endurance racer. Every 2017–2025 GSX-R1000R, the one still on most roads and most trackdays, was built without them. The HMN-L7GSXRK TS fills that exact gap now, on a platform that was already the first 1000cc superbike with race-bred variable valve timing. Built Without Wings, Until Now The 2017 redesign ran essentially unchanged through 2025, Suzuki only refreshed colors year to year, which means this is the generation that never got factory aero. That changes with the all-new 2026 model. Suzuki's SR-VVT system, a purely mechanical, centrifugal design adapted from a decade of MotoGP development on the GSX-RR, was already a first for the class when it landed in 2017. The HMN-L7GSXRK TS is scanned to this specific fairing, giving that platform the wing Suzuki wouldn't add at the factory for another nine years. Precision 3D-Printed, Not Molded Each wing is 3D-printed to its final contour rather than cut from an injection mold, which is what allows the sculpted surface detail in the first place. The structure holds that shape under sustained wind load without adding meaningful weight to the front end. Key Features Wing profile scanned specifically to the 2017–2024 GSX-R1000R fairing Precision 3D-printed manufacturing for surface detail standard tooling can't replicate Carbon fiber reinforced thermoplastic for a strong weight-to-stiffness balance 3M VHB mounting: no drilling, no permanent change to the fairing Specifications Series HARMONIZE HMN Series Model HMN-L7GSXRK TS Fitment Suzuki GSX-R1000R, 2017–2024 Material Carbon fiber reinforced thermoplastic Installation 3M VHB, no drilling What's in the Box Winglet, brake side, pre-applied 3M VHB × 1 Winglet, clutch side, pre-applied 3M VHB × 1 3M adhesion promoter × 1 Surface cleaning pad × 1 Installation instructions × 1 Installation No drilling, no screws. The VHB tape ships pre-applied to each wing, so prep is mostly about the fairing: clean the mounting surface with the included pad, apply the adhesion promoter, then press each wing into place following the instructions. Give the bond its full cure time before riding. FAQ Will this fit the all-new 2026 GSX-R1000? No. Suzuki redesigned the GSX-R1000 for 2026 with new bodywork and factory winglets. This kit is shaped for the pre-2026 fairing, the generation that came before that redesign. Does this also fit the standard GSX-R1000 (non-R)? The R and non-R share most of their fairing, with the main differences in the fork and electronics rather than bodywork, so fitment is likely similar. This kit is listed and tested specifically for the GSX-R1000R — confirm with us before ordering if you're running the standard model. Will VHB tape actually hold at speed? Yes, when the surface is prepped correctly. 3M VHB is a structural-grade tape used in the auto industry to bond panels without rivets or screws. Clean the surface, apply the included adhesion promoter, and let the bond fully cure before riding. Can I remove these later? Yes. There's no drilling involved, so there are no holes to fill in if you remove the wings or sell the bike. Is this legal for street riding? Aftermarket bodywork rules vary by country and state. Check your local vehicle regulations before installing and riding on public roads. Why HARMONIZE HARMONIZE scans for the bike Suzuki actually engineered, not a generic literbike shape. The HMN-L7GSXRK TS is built for the fairing that carried the first race-bred valve timing system onto a showroom floor, a wing that fits the same standard the engine was held to.

Images & AI alt text (one alt per image)

Buy

Checkout happens on the official store. Final checkout remains a human-approved step.

https://harmonize-design.myshopify.com/products/suzuki-gsxr1000r-winglets-hmnl7gsxrk-harmonize?utm_source=deeplumen&utm_medium=agentic&utm_campaign=worldproducts_abtest&utm_content=suzuki-gsxr1000r-winglets-hmnl7gsxrk-harmonize

Checkout happens on the official store. This page mirrors catalog facts in plain HTML for direct reading and crawlability.

Related (same category)

• Tessgo Performance Carbon Fiber Spoiler for Tesla Model Y Juniper 2026+ Standard - $293.99
• TESSGO Dual Air Outlets Carbon Fiber Spoiler Wing FOR Tesla Model Y Juniper 2025+ - $440.99
• TESSGO Carbon Fiber Rear Spoiler Wing FOR Tesla Model Y Juniper 2025+ - $304.49
• TESSGO Carbon Fiber Ascend Front Lip FOR Tesla Model Y Juniper 2026+ - $1364.99